Setting Attenuation; Setting Data Skip; Setting The Delay Time - Uniden USC230 Owner's Manual

SC230 Paper OM 062206.fm Page 78 Friday, July 21, 2006 7:39 PM

Setting Attenuation

Srch/CloCall Opt
Menu
Set Attenuator
This setting controls the attenuator for quick search,
service search and Close Call operation. Select your
setting, then press E.
Off The attenuator is off.
Reception is attenuated by about 18 dB.
On
Note: Turn on this setting if you are near other strong
signal sources. Attenuation sometimes helps to reduce
interference and desensitization that strong signals create.

Setting Data Skip

Srch/CloCall Opt
Menu
Set Data Skip
This setting controls how the scanner behaves when it
detects a constant-level transmission during quick search
or Close Call operation. Select your setting, then press E.
Off The scanner remains on the transmission until it ends.
On The scanner quickly resumes searching or Close Call
operation.
Notes:
• If you are trying to test the Close Call feature with a
nearby transmitter and you do not talk into the
transmitter, the scanner will detect this as data and
will skip the frequency when Data Skip is on. Turn the
feature off or talk into the transmitter.
• The default for this feature is On.

Setting the Delay Time

Srch/CloCall Opt
Menu
Set Delay Time
This setting determines how long the scanner waits after
a transmission ends before resuming quick search,
service search or Close Call operation. Select your
setting, then press E.
Search and Close Call Options
E
E
E
E
E
E
78