Connecting The Power Cord; Once Connections Are Completed; Menu Operations; Operations - Denon AVR-2308 Owner's Manual

Connecting the Power Cord

Wait until all connections have been completed before connecting the power cord.
NOTE
• Insert the AC plugs securely. Incomplete connections could cause noise.
• Only use the AC outlet to plug in audio devices. Do not use them as power supplies for hairdryers or
anything other than audio equipment.

Once Connections are Completed

Turning the Power On
(vpage 43)
To household
Power cord
power outlet
(AC 230 V, 50 Hz)
Connection to the AC outlet
• This outlet supply power to external audio devices.
• The power supplied from this outlet turns on and off
together with the set's power switch.
• Audio equipment with a total power consumption
of 100 W (0.43 A) can be connected.

Menu Operations

With the AVR-2308, settings and operations for most functions can be performed by operating while
looking at the menus displayed on the monitor screen.
MENU
ui
RETURN ENTER, op
[Front]
ENTER
uiop
[MODE
SELECTOR 1]
[Rear]
MENU
ENTER
uiop
RETURN
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control
unit
ENGLISH

Operations

The same operation is possible on the main unit
or remote control unit.
1
MENU
Press .
The menu is displayed.
b To operate from the remote control unit, be
sure to set the [MODE SELECTOR 1] to "AUDIO" .
2
Press ui to select the item you want
ENTER
to set, then press .
3
ui
Press again to select the item you
ENTER
want to set, then press .
4
To change the setting:
Press ui to select the item you want
to change, then press o p to change
the setting.
b To return to the previous item, press RETURN.
b Select "Default Yes" , then press o to reset to
the default setting.
5
ENTER
Press to enter the setting.
6
MENU
Press to finish.
When MENU is pressed, the settings made up to
that point are entered and the settings menu screen
turns off.