Connecting The Microphone - Radio Shack TRC-495 Owner's Manual

21-1579.fm Page 6 Thursday, August 5, 1999 9:34 AM
Warning: When installing or remov-
ing a base station CB antenna, use
extreme caution. If the antenna starts
to fall, let it go! It could contact over-
head power lines. If the antenna
touches the power line, contact with
the antenna, mast, cable, or guy
wires can cause electrocution and
death. Call the power company to re-
move the antenna. DO NOT attempt
to do so yourself.
CONNECTING THE
MICROPHONE
Mount the supplied microphone clip
on the left side of the CB, horizontally
or vertically, using the two supplied
screws. Then slide the microphone
onto the microphone holder.
6
Connect the microphone cable to the
MIC jack on the front panel. Press
the tab on the top of the microphone
plug and match the notch in the plug
with the top notch in the jack. Then
insert the plug into the jack.
To remove the microphone cable,
press the tab and pull the plug out of
the jack. Never pull on the micro-
phone cable.