Change Settings; Remote Sensor; Set Up Thermo / Hygro Sensor (Rtgr328N) - Oregon Scientific BAR816HG User Manual

NOTE It is recommended that you use alkaline
batteries with this product for longer performance.
UNIT LOCATION
Main Weather Forecast Area
Remote Temperature / Humidity Area

CHANGE SETTINGS

1. Press MODE to switch between Areas.
the selected Area.
2. Most Areas have alternate display options (for
example, Clock / Calendar). Press
options, or / to switch between clock and alarm.
3. Press and hold MODE for 2 seconds to enter setting
mode.
4. Press or to change settings.
5. Press MODE to confirm.

REMOTE SENSOR

This product is shipped with the RTGR328N Thermo /
Hygro Sensor. The main unit can collect data from up to
5 Thermo / Hygro Sensors. The main unit is compatible
with the following sensors:
THGR228N, THGR328N, THR228N, THR328N,
THWR288.
(Additional sensors are sold separately. Contact your
indicates
local retailer for more information.)
The RTGR328N Sensor collects temperature and
humidity readings, and signals from official time-keeping
organizations for the radio-controlled clock.

SET UP THERMO / HYGRO SENSOR (RTGR328N)

1. Open the battery compartment with a small Phillips
screwdriver.
2. Insert the batteries.
3. Set the channel and radio signal format. The switches
or to switch
are located in the battery compartment.
SWITCH
Channel
Radio Signal
Format
9
OPTION
If you are using more than one
sensor, select a different channel
for each sensor.
EU (DCF) / UK (MSF)