Adjusting The Thermostat; Using The Timer - DeLonghi STRETTO Instructions Manual

Instruction for use
Using for the first time
On using the appliance for the first time we advise that you turn it
on to the maximum power setting for up to 8 hours. This is to
eliminate the heater's "new odour". During this time ensure that
the room is well ventilated.
Operation and use
Turning the appliance on
Insert the plug into the mains socket and switch on.
Turn the thermostat dial clockwise to its highest setting.
The heater has 3 heat settings:
Eco/night-time (min power): Press the upper switch (the red
light on the switch will come on)
Medium power: Press the lower switch (the red light on the
switch will come on)
Maximum power: Press both switches (the red lights on both
switches will come on)
To turn the appliance off, press both switches on the 0 position so
the red lights are off and unplug at the mains.
We suggest that for night-time/ background heat or on days when tem-
peratures are not particularly cold, select minimum output to optimise
savings on energy consumption.
Please note that the min power setting will remain on, whilst the
heater is switched on to maintain a comfort background heat.

Adjusting the thermostat

When the room has reached the desired temperature, turn the thermo-
stat dial slowly in an anti-clockwise direction until you hear a click. The
thermostat will now keep the temperature in the room constant, turning
the heater on and at the minimum power to save energy.
Frost protection function
Turn the thermostat dial fully anti-clockwise so the
Press only the lower switch on. When set in this way, the appliance
will switch on automatically only if the room temperature falls below
5°C, to prevent freezing at minimum energy consumption.

Using the timer

If you wish to use the timer,position the switch in the middle position
Setting the correct time
Check the time on your watch. If for example it is 4.00 pm. (16.00),
turn the dial in a clockwise direction until the number 16 is lined up
with the triangular pointer (fig.6).
N.B.: Never turn the dial in an anti-clockwise direction!
The timer is in effect an electric clock and works only if the plug is
connected to the power supply. Whenever the plug is disconnected
or there is a power failure, the clock must be re-set.
*
is showing.
5
.
pointer
fig.6
Stretto