General Instructions; Fitting The Castors - DeLonghi STRETTO Instructions Manual

Thank you for choosing this De'Longhi heater. To get the
very best out of your new heater it is advisable to read
these instructions before using it.This will ensure that you
gain optimum results and use the appliance safely.

General instructions

1. Remove the heater from the packaging.
2. Turn the heater upside down and rest on the polystyrene.
3. Check that neither the heater nor the power cable has been
damaged in any way during transportation.
4. Do not operate the heater if damaged.
5. Your heater is suitable for either freestanding or wall mounting
usage.
Make sure that no pieces of polystyrene or other packaging materi-
al have been left between the elements of the appliance.
It may be necessary to use a vacuum cleaner to help elimate the
small pieces.

Fitting the castors

Remove the castors, wheels and assemblies from the polystyrene
packaging.
In the unlikely event that there are any parts missing please contact
our customer services department on 0845 600 6845 who will
send you the part by return.
Insert the castors into the pins of the feet and push them all the
way in until a click can be heard (fig1) Make sure that they are in
tightly by pulling the wheels gently. Attach the castor assembly into
the base of the control panel by inserting the guiding ridges
between the control panel and the first element and between the
end panel and the last element; insert the location lug into his
housing and lock the castor assembly to the product by inserting
the eye screw and screwing it in tightly (fig1). Finally turn the
heater over to its upright position, ensuring you do not damage
the wheels.
Stretto
fig.1
2