Fisher & Paykel E522BRX2 Manual page 7

Joiner Kit
For Fisher & Paykel Models: C270, E249T, E240B, E210, E381T, E372B, N388, E388,
C450, E450, E402B, E411T, E415H, E413T, E406B, E440T, E442B, E521T & E522B
Step 14
Locate the Trim Panel Assembly under the Front Upper
Bracket. The Front Upper Bracket should be free to move up
and down to aid installation (see diagram 13).
Step 15
Tighten the 6 Type B Screws to locate the Front Upper Bracket.
Secure the Trim Panel Assembly with one screw (Type A, Self
Tapping, Silver).
COMPLETE THE INSTALLATION PROCEDURE
Step 16
Close the Refrigerator doors, ensuring that all door seals sit
flush against the front walls of the Cabinets.
Introduction Date: October 2007
Step 14
Step 15
Pt No.819265 INSTRUCTION KIT JOINER RF
Step 17
Complete the installation by locating the assembled combined
cabinets within the Cupboard Cavity (refer to page 2 for
Cupboard Cavity dimensions).
Step 18
If doors are out of line after installation is complete, undo top
door hinge bracket of the un-aligned door by unscrewing all 3
screws halfway. Align by moving the door left or right. Once
aligned, re-screw the hinge bracket.
Ensure the front leveling feet are adjusted to take the load of
the combined cabinets. Note: Adjusting the leveling feet can
also affect the door alignment.
Step 17
Step 18
7