Table of Contents
Advertisement
Chapter 3 Setup
Local Network
The Local Network section changes the settings on the network connected to the
residential gateway's Ethernet ports. Wireless setup is performed through the
Wireless tab.
Configure the WAG310G's Local Area Network (LAN) settings on this screen.
Path: Setup > Local Network
Note: There are two views available, Basic and Advanced. The default view is Basic.
To display the Advanced View, click Advanced View. To return to the Basic View,
click Basic View.
Gateway IP
The values for the residential gateway's local IP Address and Subnet Mask are
displayed on this screen. In most cases, keeping the device will operate properly
when the default values are used.
IP Address—The default value is 192.168.1.1.
Subnet Mask—The default value is 255.255.255.0.
36
3425-00669 Rev E
Advertisement
Table of Contents
