Table of Contents
Advertisement
Create or Modify an Internet Access Policy
Complete the following steps to create a new policy or modify an existing policy.
1
In the Access Policy Rule section of the screen, select a policy from the Internet
Access Policy drop-down menu.
a
If you are setting up a new policy, select Add New Rule. If you select an
existing policy, the screen refreshes with that policy's settings.
Note: Multiple rules can be created for the same computer. Rules have
priorities, so the first matched rule determines the computer's access policy.
b From the Status field, select the Enabled radio button to enable the policy, or
Disabled to disable the policy.
c
In the PC (IP or Host) Name field, enter the host name or IP address of the
computer for which this policy applies.
2
In the Access restriction section, click the appropriate option, Deny or Allow,
depending on whether you want to block or allow Internet access for the PCs
you listed on the List of PCs screen.
3
If you wish to block access to websites, use the Website Blocking by Keyword
or Website Blocking by Regular Expression feature.
To use Website Blocking by Keyword, enter the URL or Domain Name of the
websites you wish to block.
Note: If any of these Keywords appears in the URL of a website, access to the
site will be blocked. Note that only the URL is checked, not the content of
each web page.
3425-00669 Rev E
Internet Access Policy
91
Advertisement
Table of Contents
