Roland JUNO-Di Editor Owner's Manual page 54

Detailed Editing for a Rhythm Set (RHYTHM Parameters)
FILTER ENV (TVF ENVELOPE)
Parameter
DEPTH
VEL CURVE
(Velocity Curve)
VEL SENS
(Velocity Sens)
T1 SENS
T4 SENS
T1–4
(Time 1–4)
L0–4
(Level 0–4)
TVF Envelope
T1
Cutoff
Frequency
L0
Note on
54
Value Explanation
Depth of the TVF envelope
-63–+63
Higher settings will cause the TVF envelope to produce greater change. Negative (-) settings
will invert the shape of the envelope.
Curve that determines how keyboard playing dynamics (velocity) will affect the TVF envelope
Set this to "FIX" if you don't want the TVF Envelope to be affected by the keyboard velocity.
FIX, 1–7
1
Specifies how keyboard playing dynamics will affect the depth of the TVF envelope.
-63–+63
Positive (+) settings will cause the TVF envelope to have a greater effect for strongly played
notes, and negative (-) settings will cause the effect to be less.
This allows keyboard dynamics to affect the T1 of the TVF envelope.
-63–+63
If you want T1 to be speeded up for strongly played notes, set this parameter to a positive (+)
value.
Use this parameter when you want key release speed to affect the T4 value of the TVF envelope.
-63–+63
If you want T4 to be speeded up for quickly released notes, set this parameter to a positive (+)
value.
TVF envelope times (T1–T4)
0–127
Higher settings will lengthen the time until the next cutoff frequency level is reached.
TVF envelope levels (L0–L4)
0–127
Specify how the cutoff frequency will change at each point, relative to the Cutoff Frequency
value.
T2 T3
L2 L3
L1
Note off
2 3 4
T4
Time
L4
5 6 7