Roland JUNO-Di Editor Owner's Manual page 34

Detailed Editing for a Patch (PATCH Parameters)
PITCH ENV (WAVE PITCH ENVELOPE)
Parameter
DEPTH
TIME KF
(Time Keyfollow)
VEL SENS
(Velocity Sens)
T1 SENS
(T1 Velocity Sens)
T4 SENS
(T4 Velocity Sens)
T1–4 ★
(Time 1–4)
L0–4
(Level 0–4)
Pitch Keyfollow
Pitch
C1 C2 C3 C4
Pitch Envelope
T1 T2
Pitch
L0
L1
Note on
34
Value Explanation
Depth of the Pitch envelope
-12–+12
Higher settings will cause the pitch envelope to produce greater change. Negative (-)
settings will invert the shape of the envelope.
Use this setting if you want the pitch envelope times (T2–T4) to be affected by the keyboard
location.
-100–+100
Based on the pitch envelope times for the C4 key, positive (+) settings will cause notes
higher than C4 to have increasingly shorter times.
Keyboard playing dynamics can be used to control the depth of the pitch envelope.
-63–+63
If you want the pitch envelope to have more effect for strongly played notes, set this
parameter to a positive (+) value.
This allows keyboard dynamics to affect the T1 of the Pitch envelope.
-63–+63
If you want T1 to be speeded up for strongly played notes, set this parameter to a positive
(+) value.
Use this parameter when you want key release speed to affect the T4 value of the Pitch
envelope.
-63–+63
If you want T4 to be speeded up for quickly released notes, set this parameter to a positive
(+) value.
Pitch envelope times (T1–T4)
0–127
Higher settings will result in a longer time until the next pitch is reached.
Pitch envelope levels (L0–L4)
-63–+63
Specify how the pitch will change at each point, relative to the pitch set with COARSE
TUNE or FINE TUNE.
+200
+100
+50
0
-50
-200 -100
C5 C6 C7
T3 T4
L3
Note off
L2
Parameter marked with a "★" can be controlled using specified MIDI messages.
Time
Key
C1 C2 C3
Time
L4
Time Keyfollow
C4 C5 C6 C7
(Matrix Control, p. 42)
-100
-50
0
+50
+100
Key