Displayed Messages - DeLonghi ESAM 6700 Instruction Manual

DISPLAYED MESSAGES

DISPLAYED MESSAGE
FILL TANK!
GROUND TOO FINE ADJUST
MILL!
Insert water spout and press
OK
INSERT WATER SPOUT!
EMPTY GROUNDS CONTAINER
INSERT GROUNDS
CONTAINER
INSERT MILK CONTAINER!
DESCALE!
LESS COFFEE!
POSSIBLE CAUSE
• The water tank is empty or
positioned incorrectly.
• The grinding is too fine and the
coffee is delivered too slowly.
• The machine cannot make cof-
fee as there is air in the hydrau-
lic circuit
• The water spout is not inserted
or is inserted incorrectly.
• The grounds container is too
full or more than 3 days have
passed since you last made
coffee (this guarantees correct
hygiene of the machine).
• After cleaning, the grounds
container has not
replaced.
• The milk container is not inser-
ted.
• The machine must be descaled.
• Too much coffee has been
used.
41
REMEDY
• Fill the tank with water and/or
insert it correctly, pushing it as
far as it will go.
• - Make the coffee again and
turn the grinding adjustment
knob one click clockwise
towards "7" while the coffee
mill is in operation. The effect
is only visible after delivering
two coffees.
• Press the OK icon to deliver
water from the spout until it
flows out normally.
• Insert water spout as far as it
will go.
• Empty the grounds container
and clean, then replace.
Important: when removing the
drip tray, the grounds container
MUST be emptied, even if it is
not completely full.
If this is not done, when you
make the next coffees, the
grounds container may fill up
more than expected and clog
the machine.
• Open the service door and
been insert the grounds container.
• Insert milk container as far as it
will go.
• The descaling
described in the "Descaling"
section needs to be performed
as soon as possible.
• Select a milder taste or reduce
the quantity of pre-ground cof-
fee, then make the coffee again.
procedure