Assembly Instructions - Horizon Fitness Dynamic 208 User Manual

A S S EMB L Y INS T RUCTIONS
A SS EM BLY S T E P 1
BOLT
SPRING WASHER
REAR FOOT TUBE
A SS EM BLY S T E P 2
BOLT
SPRING WASHER (B)
WASHER
PEDALARM
WASHER
6
HARDWARE BAG FOR STEP 1 CONTENTS :
BOLT (A) SPRING WASHER (B)
Qty: 2 Qty: 2
A) Open HARDWARE BAG FOR STEP1.
B) Attach the REAR FOOT TUBE to the BASE FRAME using
2 BOLTS (A) and 2 SPRING WASHERS (B).
HARDWARE BAG FOR STEP 2 CONTENTS :
BOLT (A) SPRING WASHER (B)
Qty: 2 Qty: 2
WASHER (C) WASHER (D)
Qty: 2 Qty: 2
A) Open HARDWARE BAG FOR STEP 2.
B) Attach the LEFT PEDAL ARM to the BASE FRAME using 1
BOLT(A), 1 SPRING WASHER (B), 1 WASHER (C) and 1
WASHER(D).
C) Repeat on the other side.
ASSE M BLY S TEP 3
CORSOLE MAST
BOLT
SPRING WASHER
NUT
ASSE M BLY S TEP 4
BOLT (A)
SPRING WASHER (C)
SPRING WASHER (D)
HANDLEBAR
BOLT (B)
HARDWARE BAG FOR STEP 3 CONTENTS :
BOLT (A) SPRING WASHER (B)
Qty: 3 Qty: 7
NUT (C)
Qty: 7
A) Open HARDWARE BAG FOR STEP 3.
B) Attach the CONSOLE MAST to the BASE FRAME using 3
BOLTS (A), 7 SPRING WASHERS (B) and 7 NUTS (C).
HARDWARE BAG FOR STEP 4 CONTENTS :
BOLT (A) BOLT (B) SPRING WASHER (C)
Qty: 2 Qty: 4 Qty: 2
SPRING WASHER (D)
Qty: 4
A) Open HARDWARE BAG FOR STEP 4.
B) Attach the LEFT HANDLEBAR to the CONSOLE MAST using
1 BOLT (A), 2 BOLTS (B) ,1 SPRING WASHER (C) And 2
SPRING WASHER (D).
C) Repeat on the other side.
7