Table of Contents
Advertisement
Pyrolytic cleaning
1
Warning: The oven gets very hot during this process. Keep small children
away.
1
Important: Before carrying out the pyrolytic cleaning process, all removable
parts, including the side rails, must be removed from the oven.
3
If you use the oven shelf runners that are available as special accessories,
these must be removed before pyrolytic cleaning.
If the side rails or oven shelf runners are still in place, 'C1' appears in the
time display.
The pyroluxe process then cannot be started due to a safety cut-out that
protects the side rails/oven shelf runners.
Performing Pyroluxe
1. First remove the worst of the residue manually.
2. Set the oven function dial to Pyroluxe
– "Pyr 1" appears in the display.
3. Press the Pyrolyse time
Pyrolytic cleaning then starts.
3
The Light does not work.
When a pre-set temperature is reached, the door is locked.
The bars of the heat indicator light up, until the door is unlocked again.
Changing the length of Pyroluxe
1. Proceed as described in the section Performing Pyroluxe
2. As long as Cook time
buttonPyrolyse time
Button Pyrolyse time
Button Pyrolyse time
Pyrolytic cleaning then starts.
3
If Cook time
then perform the setting procedure.
Changing the Pyroluxe switch-off time
The Pyroluxe switch-off time can be changed using the clock function End
time
(within 2 minutes of setting the Pyroluxe).
When the different Pyroluxes are set:
– "Pyr 1" - 3:15 = long Pyrolyse: for a high degree of soiling,
– "Pyr 2" - 2:15 = short Pyrolyse: for a light degree of soiling.
38
button.
is flashing, select the Pyroluxe period using the
:
pressed once
pressed twice = "Pyr 2".
is no longer flashing, press the Select
.
=
"Pyr 1" or
button again and
Advertisement
Table of Contents
