What To Do If - AEG COMPETENCE E4100-1 User Instructions

Operating Instructions

What to do if ...

Symptom
The cooking zones do
not function.
The oven does not heat
up.
The oven lighting does
not come on.
If you cannot rectify the fault with the help of the information
given above, please contact your local Service Force Centre.
Warning: Repairs to the appliance may only be carried out by qualified
1
specialists. Improper repairs can give rise to significant hazards for the
user.
If the appliance has been used improperly, the customer service engi-
neer's visit or that of the specialist dealer will not be free of charge,
even during the warranty period.
Information for appliances with a metal front:
Due to the cold front of your appliance the inner door glass may steam
3
over briefly if you open the door during or shortly after baking or
roasting.
52
Possible cause
The appropriate cooking
zone has not been switched
on.
The circuit breaker (at the
household fuse box) has
tripped or the fuse has
blown.
The oven has not been
switched on.
The time has not been set.
The necessary settings have
not been made.
The circuit breaker (at the
household fuse box) has
tripped or the fuse has
blown.
The oven light bulb has
blown.
Solution
Switch on the cooking zone.
Check the circuit breaker or
fuse.
Switch on the oven.
Set the time.
Check the settings.
Check the fuse.
If the circuit breaker trips or
the fuse blows several times,
please call an approved elec-
trician.
Replace the light bulb in the
oven (see Cleaning and Care).