AEG COMPETENCE E4100-1 User Instructions page 21

General Hints
3
• After a clock function has been set, the desired times can be set or
changed within 5 seconds using the + or - buttons.
• If one of the programme buttons is pressed, a brief acknowledgement
signal is sounded. Any change of settings made with the + or -
buttons is acknowledged by a short 'click' signal.
• "P" indicates that the clock is running at 60 Hz.
• After the Cook Time <-/End > function has been used, the
oven must be switched from Automatic to Manual operation by
pressing the M button.
Operating Instructions
21