Instructions For Totally Built-In Appliances; Instructions For Totally Built-In - AEG Electrolux ER6933I Installation And Instruction Manual

I nstructions for totally built-in
appliances
Dimensions of the recess
Model ER 7336 I
Height 1225 mm
Depth 550 mm
Width 560 mm
The appliance's door has been locked in
position for transport by means of pins on
both sides. According to the door opening
direction, remove relevant pins at the top
and at the bottom.
For safety reasons, minimum ventilation must
be as shown in Fig. 1.
Attention: keep ventilation openings clear of
obstruction.
Push appliance into the housing until stop strip
(A) touches the kitchen unit.
If after having carried out the previously
described operation there is still some space
left between the appliance and the kitchen unit,
fit the trimming provided together with the
appliance on the stop strip (A).
Open the door and push the appliance against
the side of the kitchen unit opposite to that of
appliance hinges.
Fasten the appliance with 4 screws provided in
the kit included with the appliance. Snap vent
grille (C) and hinge cover (D) into position.
40
ER 6933 I
1030 mm
550 mm
560 mm
50 mm
D567
A
D022
A
D265
D
D727
Fig. 1
min.
2
cm 200
Fig. 2
Fig. 3
Fig. 4
C