Instructions For Totally Built-In Appliances; Instructions For Totally Built-In - AEG Electrolux ER 7335 I Installation And Instruction Manual

I nstructions for totally built-in
appliances
Dimensions of the recess
Model ER 7335 I Model ER 6930 I
Height 1225 mm
Depth
Width
The appliance's door has been locked in
position for transport by means of pins on
both sides. According to the door opening
direction, remove relevant pins at the top and
at the bottom.
For safety reasons, minimum ventilation must be
as shown in Fig. 1.
Attention: keep ventilation openings clear of
obstruction.
Push appliance into the housing until stop strip (A)
touches the kitchen unit.
If after having carried out the previously described
operation there is still some space left between
the appliance and the kitchen unit, fit the trimming
provided together with the appliance on the stop
strip (A).
Open the door and push the appliance against the
side of the kitchen unit opposite to that of ap-
pliance hinges.
Fasten the appliance with 4 screws provided in
the kit included with the appliance. Snap vent
grille (C) and hinge cover (D) into position.
1030 mm
550 mm 550 mm
560 mm 560 mm
50 mm
D567
A
D022
A
D265
D
D727
Fig. 1
min.
2
cm 200
Fig. 2
Fig. 3
Fig. 4
C
37