Replacing The Oven Light Bulb - Electrolux EOD6335 Manual

REPLACING AN OVEN LIGHT BULB
The type of bulb required is a 300°C. 25 watt small
Edison Screw. Part number 572 491 5431-00/1
(Available through your local Service Force Centres).
CAUTION:
DISCONNECT THE APPLIANCE
FROM THE ELECTRICITY SUPPLY BEFORE
REPLACING THE BULB.
Open the oven door and remove the shelves and
wirework runners to enable easy access to the oven
light assembly.
Insert a flat blade screwdriver between the oven side
and glass which covers the bulb.
Support the glass with your hand and prise out
sufficiently to release the glass cover. Unscrew the
bulb in an anti-clockwise direction until it is possible
to remove the bulb with ease.
Fit the new bulb by turning in a clockwise direction
until it is secure. Ensuring the indent to the flange is
pointing to the rear of the oven, replace the glass by
pushing it firmly into the hole to cover the bulb
assembly.
Replace the shelves and wirework runners. Restore
the electricity supply and adjust the time of day and
clock as necessary.
38