Floppy And Ide Disk Drive Connectors - Abit AN8 SLI User Manual

2-20 Chapter 2

(9). Floppy and IDE Disk Drive Connectors

rd
AN8 Ultra/AN8 3 Eye/AN8/AN8 V2.0/AN8-V
AN8 SLI
The FDC1 connector connects up to two floppy drives with a 34-wire, 2-connector floppy cable. Connect
the single end at the longer length of ribbon cable to the FDC1 on the board, the two connectors on the
other end to the floppy disk drives connector. Generally you need only one floppy disk drive in your
system.
NOTE: The red line on the ribbon cable must be aligned with pin-1 on both the FDC1 port and the floppy
connector.
AN8 Series