Abit AN8 SLI User Manual page 46

2-34
S/PDIF Connection:
• S/PDIF Input Connection:
1. Remove the rubber protection-caps from both ends of the cable.
2. Plug one end of the cable into the [SPDIF IN] jack on this daughter-card.
3. Plug another end into the [Digital-Out] (SPDIF-Out) jack on your digital multimedia device.
• S/PDIF Output Connection:
1. Remove the rubber protection-caps from both ends of the cable.
2. Plug one end of the cable into the [SPDIF OUT] jack on this daughter-card.
3. Plug another end into the [Digital-In] (SPDIF-In) jack on your digital multimedia device.
AN8 Series
Chapter 2