Connecting Peripheral Devices; Floppy And Ide Disk Drive Connectors - Abit A-S78H User Manual
Amd socket am2+/am2 amd 780g chipset / ati radeon hd 3200 graphics 5200mt/s ht3.0 dual channel ddr2 1066 hdmi / dvi / vga gigabit lan sata 3gb/s raid usb 2.0 5.1-channel hd audio softmenu technology eq technology vista premium hw
Table of Contents
Advertisement
1.8 Connecting Peripheral Devices
1.8.1 Floppy and IDE Disk Drive Connectors
Connect your floppy drive to the [FDC1] port by a floppy cable.
Check the pin-1 orientation before connecting. Make sure to align with the
※
pin-1 mark on both the [FDC1] port and floppy drive connector.
Connect your IDE drive(s) to [IDE1] port by an IDE
cable.
Each of the IDE port connects up to two IDE drives
by an IDE cable. Connect the single end of the
cable's longer length to the [IDE1] port, and then
connect the other two ends to your IDE drives.
Make sure to configure the "Master" and "Slave" relation before connecting
※
two drives by one cable.
Check the pin-1 orientation before connecting. Make sure to align with the
※
pin-1 mark on both the [IDE1] port and IDE drive connector.
1-12
A-S78H
Hide quick links:
Advertisement
Table of Contents
