Hardware Setup
(9).
Front Panel Audio Connection Header [FP-AUDIO1]
This header provides the connection to audio connector at front panel.
•
To use the audio connector at front panel, remove all the jumpers on this header, and then connect
to front panel by the extenson cable provided with the chassis.
•
To use the audio connector at rear panel, disconnect the extension cable, attach the jumpers back at
pin 5-6, and pin 9-10 (default setting).
Pin
Pin Assignment
1
Audio Mic.
3
Audio Mic. Bias
Speaker Out Right
5
Channel
7
X
Speaker Out Left
9
Channel
11
Ground
13
VCC
Pin
Pin Assignment
2
Ground
4
VCC
Speaker Out Right
6
Channel Return
8
NC
Speaker Out Left
10
Channel Return
12
S/PDIF In
14
S/PDIF Out
User's Manual
2-13