Abit IC7-G User Manual page 18

1-2
•
Professional digital audio interface supports 24-bit S/PDIF Input/Output
11. System BIOS
•
SoftMenu
•
Supports Plug-and-Play (PNP)
•
Supports Advanced Configuration Power Interface (ACPI)
•
Supports Desktop Management Interface (DMI)
•
Write-Protect Anti-Virus function by AWARD BIOS
12. Internal I/O Connectors
•
1x AGP PRO slot
•
5x PCI slots
•
1x Floppy port supports up to 2.88MB
•
2x Ultra ATA/100/66/33 connectors
•
4x Serial ATA 150 connectors
•
2x USB 2.0 headers
•
2x IEEE 1394a headers
•
1x CD-IN, 1x AUX-IN header
•
1x IrDA header
13. Back Panel I/O
•
1x PS/2 Keyboard, 1x PS/2 mouse
•
1x Serial port connectors, 1x Parallel port connector
•
1x S/PDIF In connector
•
1x S/PDIF Out connector
•
AUDIO1 connector (Rear-Left / Rear-Right, Center/Subwoofer)
•
AUDIO2 connector (Mic-In, Line-In, Front-Left/Front-Right)
•
2x USB 2.0, 1x IEEE 1394 Connector
•
2x USB 2.0, 1x RJ-45 LAN Connector
14. Miscellaneous
•
ATX form factor
•
Hardware Monitoring – including Fan Speed, Voltages, CPU and system temperature
•
Supports Wake Up by LAN, Modem Ring, RTC Alarm, Keyboard and Mouse Power On
•
Supports STR (Suspend to RAM)
Supports Wake On LAN, Modem, but your ATX power supply 5V standby power must be
able to provide at least a 720mA current capacity. Otherwise, the functions may not work
normally.
This motherboard supports the standard bus speeds of 100/66/33MHz that are used by
specific PCI, processor and chipset specifications. Exceeding these standard bus speeds is not
guaranteed due to the specific component specifications.
The Serial ATA controller only supports Ultra DMA/ATA100 or higher hard drive. Do not
use hard drives under this specification, or it won't work.
Specifications and information contained herein are subject to change without notice.
IC7-G
™
Technology to set CPU parameters
Chapter 1