Mounting; Orientation; Rigging - Chauvet 4 Bar Flex User Manual

Mounting

Orientation

Rigging

Mounting Diagram
4BAR™ Flex User Manual (Rev. 7)
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
The 4BAR™ Flex may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
·
Before deciding on a location for the product, always make sure there is easy
access to the product for maintenance and programming purposes.
·
Make sure that the structure onto which you are mounting the product can support
the product's weight. Please see the
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
·
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity.
·
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
·
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
Pod tilt adjustment
Technical Specifications
Pod pan adjustment
Tripod insertion
for weight information.
L-brackets
Page 9 of 16