MSI G41M-P25 User Manual page 30

IMPORTANT
* Please refer to the block diagram below about the M-Flash function.
i
Select BIOS file from the root directory of
USB/ Storage drive (FAT/FAT32 format only)
in "Load BIOS source file from" field
Please check USB drive/
Storage drive/ BIOS file
status and reboot the
system manually again.
Start M-Flash
I 4 short beeps
BIOS update successfully
Boot from the USB drive successfully
* Due to the special design of some graphics cards will cause dark screen during M-
flash operation, and you may refer the beeps from the system to confirm the current
M-flash process.
== BIOS Data Saving ==
The following fields are used to read the onboard BIOS ROM data, and save it to USB
drive/ storage drive.
Save File to Selected Device
Please setup a specific folder in specific USB drive/ storage drive to save BIOS file
from BIOS ROM chip data. Note: it only supports FAT/ FAT32 file system drive.
Save File Name as
Please setup a specific name for the BIOS file, which will be saved into the USB drive/
storage drive. Note: we suggest you using the official name as the default name.
Save Extend File name as
Please setup a specific extend name for the BIOS file, which will be saved into the USB
drive/ storage drive. Note: we suggest you using [ROM] as default name.
Start to save file
Press "Enter" and select "OK" the system will stare to save the onboard ROM chip data
to the selected USB drive/ storage drvie.