Table of Contents
Advertisement
MS-7592
Chassis Intrusion Connector JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is
opened, the chassis intrusion mechanism will be activated. The system will record
this status and show a warning message on the screen. To clear the warning, you
must enter the BIOS utility and clear the record.
Parallel Port Header JLPT1 (optional)
This connector is used to connect an optional parallel port bracket. The parallel
port is a standard printer port that supports Enhanced Parallel Port (EPP) and
Extended Capabilities Parallel Port (ECP) mode.
Clear CMOS Jumper JBAT1
There is a CMOS RAM onboard that has a power supply from an external battery
to keep the data of system configuration. With the CMOS RAM, the system can
automatically boot OS every time it is turned on. If you want to clear the system
configuration, set the jumper to clear data.
JBAT1
Keep Data
| • ! 41
Clear Data
IMPORTANT
You can clear CMOS by shorting 2-3 pin while the system is off. Then return to
1-2 pin position. Avoid clearing the CMOS while the system is on; it will damage
the mainboard.
i
19
Hide quick links:
Advertisement
Table of Contents
