Table of Contents
Advertisement
18 www.electrolux.com
C
9. TECHNICAL DATA
Dimension
Voltage
Frequency
The technical information are situated in
the rating plate on the internal left side of
the appliance and in the energy label.
A
B
C
B
Height
Width
Depth
• Remove the plinth .
• Remove the cap (A) and position it on
the opposite side.
• Unscrew the lower hinge (C) and the
washers (B)
• Position the pin and the washers on the
opposite side .
• Re-screw the upper hinge.
• Refit the door.
• Remove the covers. (B) Remove the
cover pins. (A)
• Unscrew the handles and fix them on
the opposite side. (C)
A
• Re-insert the cover pins (A) on the op-
posite side
• Do a final check to make sure that:
– All screws are tightened.
– The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the nat-
ural fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The Af-
ter Sales Service specialist will carry out
the reversibility of the doors at your cost.
1850 mm
595 mm
658 mm
230-240 V
50 Hz
Advertisement
Table of Contents
