Table of Contents
Advertisement
8.4 Rear spacers
4
8.5 Levelling
8.6 Door reversibility
2
1
3
You can find the two spacers in the bag
with documentation.
Do these steps to install the spacers:
1.
Release the screw.
2.
Engage the spacer below the screw.
3.
Turn the spacer to the right position.
4.
Tighten again the screws.
Accurate levelling prevents the vibration
and noise of the appliance during opera-
tion. To adjust the height of the appliance
loosen or tighten the two adjustable front
feet.
To carry out the following opera-
tions, we suggest that this be
made with another person that will
keep a firm hold on the doors of
the appliance during the opera-
tions.
To change the opening direction of the
door, do these steps:
• Remove the plug from the power sock-
et.
• Unscrew the upper pin and screw it on
the opposite side.
• Remove the door.
ENGLISH
17
Advertisement
Table of Contents
