Saving Power; Changing Language Settings - Epson MovieMate 85HD User Manual

Saving Power

The power turns off automatically when a DVD is stopped for more
than 30 minutes. You can select a time to turn off the projector while a
movie is playing, in case you fall asleep while watching.
To select a sleep setting, press
select from the following settings:
■ Sleep Off:
The power switches off automatically after 30 minutes
of inactivity (default setting).
■ Sleep 10, 20, 30, 60, 90, 120, 150:
automatically after the number of minutes specified, whether or
not a movie is playing. You can select from
After you set the sleep timer, you can see the time remaining by pressing
Note: Sleep timer settings are not saved after you turn the projector off.

Changing Language Settings

You can use the Language Setup Page to change the default language for DVDs that allow
you to make this selection.
1. Press the button on the remote control. You see the Language Setup Page:
2. Press to highlight the setting you want, then press
available.
is the language used for the projector's menus. Other settings may not
OSD Language
be available, depending on the DVD you are playing.
3. Press to select the language you want, then press
codes, see page 80.
4. To exit the menu, press
. Continue pressing the button to
The power switches off
to
10 150
.
minutes.
.
to display the list of languages
to save it. For a list of language
Doing More with Epson MovieMate
49