Electrical Connection - Electrolux ERE34400W Instruction Book

7. Remove the two cover lids on the
7
roof
8. Unscrew the two screws on the
8
hinge
9. Remove the cover on the front
Reassembly in reverse order on the
9
opposite side.
Raise the cabinet and replace the
ventilation grille.
10. To transfer the handle.
10
Unscrew the screws. Fit the handle
onto the opposite side by turning it
one half circle. Press the supplied
plastic plugs into the holes to which
the handle was previously fitted.
Put the cabinet in position. Check that
the appliance is level. See the section
"Positioning the cabinet".

Electrical connection

Connect the cabinet to a grounded
electrical outlet.
Voltage: 230 V.
Fuse: 10 A.
Refer to the rating plate on the left
inside the cabinet.
21