Installation; Unpacking; Remove The Transport Supports; Cleaning - Electrolux ERE34400W Instruction Book

INSTALLATION

Unpacking

Unpack the cabinet and check that it is in good condition and free of any
transport damage. Notify the dealer immediately of any damage. Hand the
packaging over for recycling. For more information, contact your local city office
or the dealer.
Do not allow children to play with the
packaging. The plastic film can cause
suffocation.

Remove the transport supports

Remove the tape and the transport
supports from
· the door sides
· inside the door hinges
· the shelves
Remove the transport support on the
glass shelf by pushing the support
forward along the edge of the shelf
until it stops. Take hold of the rear
edge of the glass shelf and pull the
shelf and transport support forward
until the shelf tilts and the transport
support can be removed. Some
models are fitted with a silencing pad
under the cabinet. Do not remove this
pad.
17
Installation of distance
Assemble the attached distance on
the back side of the panel according to
the illustration.

Cleaning

Wash the inside of the cabinet using
lukewarm water, a mild washing-up
detergent and a soft cloth.