When The Appliance Is Not In Use; Something Not Working - Electrolux ERE34400W Instruction Book

When the appliance is not in use

Disconnect the appliance from electricity supply.
Empty all foods and clean the appliance, leaving the doors ajar to prevent
unpleasant smells.
If the cabinet will be kept on, ask somebody to check it once in a while to
prevent the food inside from spoiling in case of a power failure.

SOMETHING NOT WORKING

Before contacting your local Service Force Centre check the following point:
Problem
" " is displayed in the
temperature display.
It is too cold inside the
refrigerator.
It is too warm inside the
refrigerator.
Water comes out on the floor.
The compressor operates
continuously.
15
Possible cause / Remedy
An error has occurred in measuring the
temperature. Call your service representative.
(The cooling system will continue to keep
food products cold, but temperature
adjustment will not be possible.)
Set a warmer temperature.
Set a lower temperature.
Put food products in the right place inside the
refrigerator. See the chapter "Temperature
inside the refrigerator".
Distribute the food products to allow cold air
to circulate around them.
Make sure that the door is completely closed
and that the insulating strip is complete and
clean.
Place the drain hose at the back of the
cabinet above the drain bowl. See the
chapter "Before using the cabinet the first
time".
Set a warmer temperature.
Make sure that the door is completely closed
and that the insulating strip is complete and
clean.