Use; Control Panel; Controls - Electrolux EWF 805 Instruction Booklet

Use

Control panel

1. Detergent dispenser drawer
Programme option buttons
Depending on the programme, different option
buttons can be combined.
When these buttons are pressed, the corresponding
lights come on. When they are pressed again, the
lights go off.
If an incompatible option with the selected
programme has been chosen, the corresponding
light flashes for about 2 seconds.
The option buttons:
START DELAY, QUICK WASH;
SILENT CYCLE and
must be selected after the required programme has
been chosen, by turning the programme selector
(see section 8) and before starting the machine, by
pressing button START / PAUSE.
2. DELAY START button
This button allows the delay of starting of the
washing programme by 8 H and 4 H hours.
The delay which has been selected is indicated
when the corresponding light comes on.
To use this option proceed as follows:
1. Select the required programme by the
programme selector (see section 8).
2. Press the required option buttons.
3. Push DELAY START button, as many times
as necessary to get the required delay until the
corresponding light comes on.
4. Press START / PAUSE button.
IMPORTANT!
• If you would like to cancel
option or to change the selected delay, proceed as
follows:
1. Turn the dial programme selector to position "
REDUCE SPIN
DELAY START
O
".
10
2. Start the normal process to select a programme
again.
• If you need to stop the machine to put in more
laundry (having selected
first), proceed as follows:
1. Depress START / PAUSE button.
2. Turn the dial programme selector to position "
3. Wait two or three minutes before opening the
door to give the electric locking mechanism
time to release.
4. Place the laundry in the drum.
5. Follow the normal operating sequence to select a
programme.
DELAY START option can't be selected with
programmes (DRAIN) or
3. QUICK WASH button
Using this option, you can get good washing results
in a short period of time, since with option, the
COTTON, SYNTHETICS, and DELICATES
programmes are modified in order to obtain short
washing times (recommended for small or lightly-
soiled loads).
This modification consists of reducing the number of
rinse cycles (one less) and also increases the water
level used in the remaining two rinse cycles.
4. SILENT CYCLE button
This option eliminates all spin phases of the cycle,
increasing the rinses number stops the cycle before
the final spin with water in the drum. To continue the
programme is necesary to select the
or (SPIN) programme.
DELAY START option
O
".
(SPIN).
(DRAIN)