Something Not Working - Electrolux Chef CKG5060W Instruction Book

Something not working

If the appliance is not working correctly, please carry out the following checks,
before contacting your local Authorized Service Centre.
IMPORTANT: If you call out an engineer to a fault listed below, or to repair
a fault caused by incorrect use or installation, a charge will be made even
if the appliance is under guarantee.
Symptoms
The flow of gas seems abnormal
No burner ignition
The gas ring burns unevenly
The oven does not come on
It takes too long to finish the
dishes, or they are cooked too
fast
The oven lamp does not work
34
Check that:
•
The flame spreader holes are not obstructed
•
The pressure regulator is working
•
The bottle valve or gas mains valve is
completely open
Check that:
•
Gas supply is completely open
•
The position of gas pipe is correct
•
The burner is not wet
•
The burner cap and ring burner have been
replaced correctly after cleaning
•
The power is on
Check that:
•
The main jet is not blocked and the ring
burner is clean of food particles
•
The burner cap and ring burner have been
replaced correctly after cleaning
Check:
•
Check if a cooking function/temperature has
been selected correctly
•
The power socket switch or the switch from
the mains supply to the cooker is ON.
Check:
•
The temperature may need adjusting
Check:
•
The power is on
•
The lamp has not burnt out. To replace it
follow the instructions given in the relevant
paragraph.
Solutions