Table of Contents
Advertisement
If the appliance is not working correctly, please carry out the following checks, before contacting the
nearest Electolux Service.
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by
incorrect use or installation, a charge will be made even if the appliance is under guarantee.
Symptoms
The flow of gas seems abnormal
No burner ignition
The gas ring burns unevenly
The oven does not come on
It takes too long to finish the dishes, or they
are cooked too fast
The oven lamp does not work
If after these checks, the appliance still does not work, contact the nearest Electolux Service. They will
need the following information:
1. Your name, address and post code.
2. Your telephone number
3. Clear and concise details of the fault
4. The model and the serial number (see rating label)
5. Date of purchase
SOMETHING NOT WORKING
Check that:
•
•
•
Check that:
•
•
•
•
Check that:
•
•
Check:
-
-
Check:
-
-
Solutions
The flame spreader holes are not obstructed
The pressure regulator is working
The bottle valve is completely open
Gas supply is completely open
The position of gas pipe is correct
The burner is not wet
The burner cap and ring burner have been
replaced correctly after cleaning
The main jet is not blocked and the ring burner
is clean of food particles
The burner cap and ring burner have been
replaced correctly after cleaning
check if a cooking function/temperature has
been selected correctly
the socket switch or the switch from the mains
supply to the cooker are ON.
the temperature may need adjusting
The lamp has burnt out. To replace it follow the
instructions given in the relevant paragraph.
19
Advertisement
Table of Contents
