Setting The Lens And Brightness Level; Optimizing The Lens Setup - Honeywell HD3CHS User Manual

Setting the Lens and Brightness Level

To select the DC lens function:
1. From the Main menu, select LENS.
2. Move the joystick control LEFT or RIGHT to select DC (Automatic Iris
lens).
3. Move the joystick control LEFT or RIGHT to access the BRIGHTNESS
control for iris level adjustment. Options are: 1~/ 50 (default) ~ /100).

Optimizing the Lens Setup

The table below explains the options on the EXPOSURE submenu. Each
selection takes you to a separate screen (see description below).
➤
MAIN MENU EXPOSURE
SHUTTER 1/60
AGC MIDDLE
SENS-UP OFF
BLC OFF
D-WDR OFF
RETURN RET
SHUTTER
AGC
Document 800-05321 Rev B
05/10

Select a shutter speed:
1/60 / 1/50 (default) sec.
FLK (Flickerless) Reduces on-screen flickering.
Caution
OFF
HIGH
MIDDLE (default)
LOW
When set to FLK, SENS-UP is disabled.
17