BIOS Setup
#
IDE Function Setup:
Click <Enter> key to enter its submenu:
Phoenix – Award WorkstationBIOS CMOS Setup Utility
OnChip IDE Channel 1
OnChip IDE Channel 2
IDE DMA transfer access
IDE HDD Block Mode
Serial-ATA 1/2
Serial-ATA 3/4
↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
OnChip IDE Channel 1/ OnChip IDE Channel 2:
This item allows you to enable or disable the primary (IDE1) and secondary (IDE2) IDE controller. Select
[Disabled] if you want to add a different hard drive controller.
IDE DMA transfer access:
This item selects the DMA mode for devices connected through IDE channels.
IDE HDD Block Mode:
This item enables or disables the IDE HDD Block Mode.
Serial-ATA 1/2, Serial ATA 3/4:
This item enables or disables the on-chip SATA controller.
IDE Fuction Setup
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
F6: Fail-Safe Defaults
Item Help
F7: Optimized Defaults
User's Manual
3-13