Ide Function Setup - Abit KN9S User Manual

IDE Function Setup:

Click <Enter> key to enter its submenu:
On-Chip IDE 1 Controller
IDE DMA Transfer access
IDE HDD Block Mode
On-Chip SATA Controllers
↓↑→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
On-Chip IDE 1 Controller
This item allows you to enable or disable the IDE1 controller.
IDE DMA Transfer access:
This item selects the DMA mode for devices connected through IDE channels.
IDE HDD Block Mode
This item enables or disables the IDE HDD Block Mode.
On-Chip SATA Controllers
This item enables or disables the on-chip SATA controller.
3-12
Phoenix – AwardBIOS CMOS Setup Utility
IDE Function Setup
F6: Fail-Safe Defaults
Enabled
Enabled
Enabled
Enabled
Item Help
F7: Optimized Defaults
KN9 SLI, KN9 Ultra, KN9S