2-16
(8). Serial ATA Connectors
These connectors are provided to attach one Serial ATA device at each channel via Serial ATA cable.
(9). Status Indicators
• LED1 (5VSB): This LED lights up when the power supply is connected with power source.
• LED2 (VCC): This LED lights up when the system power is on.
• NORMAL: This LED lights up when the system works under Normal Graphics Mode.
• SLI: This LED lights up when the system works under SLI Graphics Mode.
• SLI_PWR1: This LED lights up if the ATX4P1 connector is not connected to the power supplier
when working under SLI Graphics Mode.
KN8 SLI
Chapter 2