2-8
Chapter 2
6. Insert the SLI bracket into the bracket slot
between the graphics cards. Secure the SLI
bracket and the graphics cards to the chassis
with screws.
NOTE: The OTES SLIpstream that packed in
the package is optional. Please refer to the
Quick
Installation
Guide
of
the
OTES
SLIpstream if you wish to install it.
IMPORTANT: Please disable the following
items in BIOS setup while running under SLI
mode: All the "FanEQ controls" (CPU, NB,
SYS, OTES1, OTES2 and AUX FanEQ Control)
and "Cool 'n' Quiet Technology". The system
may be unstable without doing so. Detail
information about these items will be described
in "Chapter 3. BIOS Setup".
KN8 SLI