Appendix C. Installing The Winbond Hardware Monitor System - Abit NV7M User Manual

Installing The Winbond Hardware Monitor System
Appendix C. Installing The Winbond Hardware
The Winbond hardware monitor system is a self-diagnostic system for PCs. It will protect PC hardware
by monitoring several critical items including power supply voltage, processor and system fan speeds,
and processor and system temperatures. These items are important for the operation of the system; errors
may result in permanent damage to the PC. Once any item is out of its normal range, a warning message
will pop up and remind the user to take proper measures.
The following description will tell you how to install the Winbond hardware monitor system and use it.
Insert the nForce series CD into your CD-ROM drive. It should execute the program automatically. If not,
you can go to the CD location and execute the execution file from the main directory of this CD. After it
is executed, you will see the screen below.
Step 1: Click "Utility" button.
Step 2: Click "Windbond Hardware Doctor"
button to start install the hardware monitor
system utility.
Monitor System
Step 3: Then hardware doctor setup program is
preparing the InstallShield
to the rest of the setup process.
Step 4: The welcome screen and its dialogue box
will appear. Click the "Next>" button to go on.
C-1
®
wizard to guide you
User's Manual