Load Fail-Safe Defaults; Load Optimized Defaults; Set Supervisor Password; Set User Password - Abit NV7M User Manual

Introducing the BIOS

3-8. Load Fail-Safe Defaults

When you press <Enter> on this item you get a confirmation dialog box with a message similar to:
Pressing "Y" loads the BIOS default values for the most stable, minimal-performance system operations.

3-9. Load Optimized Defaults

When you press <Enter> on this item you get a confirmation dialog box with a message similar to:
Pressing "Y" loads the default values that are factory settings for optimal performance system operations.

3-10. Set Supervisor Password

Can let you enter and change the options of the setup menus.

3-11. Set User Password

Set Password: Can enter but do not have the right to change the options of the setup menus. When you
select this function, the following message will appear at the center of the screen to
assist you in creating a password.
Type the password, up to eight characters in length, and press <Enter>. The password typed now will
clear any previously entered password from CMOS memory. You will be asked to confirm the password.
Type the password again and press <Enter>. You may also press <Esc> to abort the selection and not
enter a password.
To disable a password, just press <Enter> when you are prompted to enter the password. A message will
confirm the password will be disabled. Once the password is disabled, the system will boot and you can
enter Setup freely.
Load Fail-Safe Defaults (Y/N)? N
Load Optimized Defaults (Y/N)? N
ENTER PASSWORD:
PASSWORD DISABLED.
3-21
User's Manual