Abit KG7-RAID User Manual page 7

Hide thumbs Also See for KG7-RAID:
Table of Contents

Advertisement

Introduction of KG7-Lite/KG7/KG7-RAID Features
5. Multi I/O Functions
!
Two channels of Bus Master IDE ports supporting up to four Ultra DMA 33/66/100 devices
(KG7-Lite/KG7 Only). And two channels (IDE3 & IDE4) of Bus Master IDE ports supporting up
to four Ultra DMA 33/66/100 specifications HDD devices (KG7-RAID Only)
!
One PS/2 keyboard and PS/2 mouse connectors
!
One floppy port connector (up to 2.88MB)
!
One parallel port connector (Standard/EPP/ECP)
!
Two serial ports connectors
!
Two USB connectors
!
One USB header for two extra USB channels
6. Miscellaneous
!
ATX form factor
!
One AGP slot, six PCI slots
!
Built-in Wake on LAN header
!
Built-in IrDA TX/RX header
!
Built-in Wake On Ring header
!
One built-in SM-Bus header
!
Hardware monitoring:Included fan speed, voltages, CPU and system environment temperature
!
Board size: 305 * 245mm
$
Supports Wake On LAN, Modem, but your ATX power supply 5V standby power must be
able to provide at least a 720mA current capacity. Otherwise, the functions may not work
normally.
$
PCI slot 5 shares IRQ signals with the HPT 370A IDE controller (supports Ultra DMA 100).
The driver for HPT 370A IDE controller supports IRQ sharing with other PCI devices. But if
you install a PCI card that doesn't allow IRQ sharing with other devices into PCI slot 5, you
may encounter some problems. Furthermore, if your Operating System doesn't allow
peripheral devices to share IRQ signals with each other, such as Windows
you can't install a PCI card into PCI slot 5. (KG7-RAID Only)
$
HPT 370A IDE controller is designed to support high-speed and high performance mass
storage devices. Thus we suggest that you don't connect non-disk devices that use ATA/ATAPI
interfaces, such as CD-ROM to HPT 370A IDE connector (IDE3 & IDE4). (KG7-RAID Only)
$
DDR DIMM modules should be populated in DIMM4 to DIMM3 (KG7-Lite Only) or DIMM4
to DIMM1 (KG7/KG7-RAID Only) by orders.
$
This motherboard supports the standard bus speeds of 66 MHz/100 MHz/133 MHz that are
used by specific PCI, processor and chipset specifications. Exceeding these standard bus speeds
is not guaranteed due to the specific component specifications.
$
Specifications and information contained in this manual are subject to change without notice.
All brand names and trademarks are the property of their respective owners.
Note
1-3
®
NT for example,
User's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kg7Kg7-lite

Table of Contents