Abit KG7-RAID User Manual page 26

2-16
Figure 2-11. KG7-Lite/KG7/KG7-RAID back panel connectors
Figure 2-11 shows the KG7-Lite/KG7/KG7-RAID back panel connectors, these connectors are for
connection to outside devices to the motherboard. We will describe which devices will attach to these
connectors below.
(13). PS/2 Keyboard Connector
(14). PS/2 Mouse Connector
Attach a PS/2 mouse to this 6-pin Din-connector.
(15). USB Port Connectors
This motherboard provides two USB ports. Attach the USB connector from the individual device to these
connectors.
You can attach USB devices such as a, scanner, digital speakers, monitor, mouse, keyboard, hub, digital
camera, joystick etc. to one of each USB connector. You must make sure your operating system supports
KG7-Lite/KG7/KG7-RAID
Attach a PS/2 keyboard connector to this 6-pin Din-connector.
If you use an AT keyboard, you can go to a computer store to
purchase an AT to ATX converter adapter, then you can
connect your AT keyboard to this connector. We suggest you
use a PS/2 keyboard for best compatibility.
this feature and you may need to
install an additional driver for
individual devices. In Please refer
to your device user's manual for
detailed information.
Chapter 2