Attaching The Filter Cover To The Projector - Panasonic PT-LX26HE Operating Instructions Manual

Replacement
Attention
Turn off the power before you replace the air filter unit.
z
When attaching the air filter unit, make sure that the projector is stable, and work in an environment that is
z
safe, even in the event of the air filter unit dropping.
Do not operate the projector with the filter removed. Dust may accumulate on the optical elements degrading
z
picture quality.
Do not put anything into the air vents. Doing so may result in malfunction of the projector.
z
Do not wash the filter with water or any other liquid matter. Otherwise the filter may be damaged.
z

Attaching the Filter Cover to the Projector

J
The supplied filter cover is designed for preventing dust accumulation on the filter when mounting the projector on
the ceiling.
1 ) Turn over the projector.
2 ) Press the adjustable foot lock latch and pull out the adjustable foot, and then attach
the filter cover (supplied) to the projector (
). And tie the string around the adjustable foot as Picture (1) shown.
shown
3 ) Press the adjustable foot lock latch and pull in the adjustable foot.
4 ) Attach the projector to the ceiling mount in accordance with the instruction
manuals which come with the ceiling mount as Picture (2) shown.
Picture (1)
Attention
If the Projector Mount Base ET-PKL100B is applied, the supplied filter cover is unnecessary.
z
60
- ENGLISH
Push the cover in the arrow direction as the Picture (1)
To Ceiling Mount
Projector
Picture (2)
Filter Cover
(supplied)