Filter Counter Reset; Attaching The Filter Cover To The Projector - Panasonic PT-VX400U Service Manual

Maintenance
n Filter counter reset
After replacing the filter, be sure to reset the filter coun-
ter.
1) Press st to select [Filter counter reset].
2) Press the <SELECT> button.
[Filter counter Reset?] appears. Select Yes to con-
tinue. Another confirmation dialog box appears, select
Yes to reset the Filter counter.
n Attaching the filter cover to the projector
The supplied filter cover is designed for preventing dust accumulation on the filter when mounting the projector on
the ceiling.
1) Turn over the projector.
2) Remove the filter cover (bottom).
3) Attaching the filter cover (supplised) to the projector.
4) Attach the projector to the ceiling mount in accor-
dance with the instruction manuals which come with
the ceiling mount.
Attention
• Please keep the filter cover (bottom) for later use.
• If the Projector Mount Base (ET-PKV100B) is applied, the
supplied filter cover is unnecessary.
Attention
• Turn off the power before you replace the air filter unit.
• When attaching the air filter unit, make sure that the
projector is stable, and work in an environment that is
safe, even in the event of the air filter unit dropping.
• Do not operate the projector with the filters removed.
Dust may accumulate on the optical elements degrad-
ing picture quality.
• Do not put anything into the air vents. Doing so may
result in malfunction of the projector.
• Do not wash the filters with water or any other liquid
matter. Otherwise the filters may be damaged.
To ceiling mount
-10-
Filter cover
(suppiesed)