Setting; Language; Menu Position; Auto Setup - Panasonic PT-LX26HE Operating Instructions Manual

Setting

Setting
Select [Setting] from the Main Menu (see
"Navigating through the menu" on page 34),
then select the item from the sub-menu.
Remote Control

Language

1 ) Press ▲▼ to select [Language].
2 ) Press ► or the <SELECT> button.
3 ) Press ▲▼ to select the desired
language.
The language used in the On-Screen Menu is
z
available in English, German, French, Italian,
Spanish, Portuguese, Dutch, Swedish, Finnish,
Norwegian, Danish, Polish, Hungarian, Romanian,
Czech, Russian, Turkish, Arabic, Kazak,
Vietnamese, Chinese, Korean, Japanese and Tha
z
z
50
- ENGLISH
Control Panel
i.

Menu position

This function is used to change the position of the
On-Screen Menu.
1 ) Press ▲▼ to select [Menu position].
2 ) Press the <SELECT> button to change
the position.
The [Menu position] changes each time you
z
press <SELECT> button as follows:
the center → the bottom left → the bottom right → the
top left → the top right → the center......

Auto setup

1 ) Press ▲▼ to select [Auto setup].
2 ) Press ► or the <SELECT> button.
3 ) Press ▲▼ to select these functions as
follows:
Input search
J
This function detects the input signal
automatically. When a signal is found, the search
will stop.
Off Input search will not work.
On1 Input search works.*
On2 Input search works.*
*1 : ●When pressing the <AUTO SETUP> button on the
remote control or the control panel.
*2 : ●When turning on the projector by pressing the
< >
button on the remote control or the control
panel.
●
When pressing the<AUTO SETUP> button on
the remote control or the control panel.
●
When the current input signal is cut off.*
* If the [AV mute] or [Freeze] function is active,
cancel it to activate the Input search. It is
also unavailable when On-Screen menu is
displayed.
Auto PC adj.
J
On
Enables Auto PC adjustment. *
Off
Disables Auto PC adjustment.
*1 : When pressing the <AUTO SETUP> button on
the remote control or the control panel.
1
2
1