Installation - Electrolux ERD 3322 Instruction Book

Noisiness
Hereunder you will find some normal causes of
noise that do not jeopardise normal functioning of
the product.
Brrrr
Compressor motor noise
Blubb
Blubb
Noise caused by the gas circulating in the
refrigerating circuit pipes

INSTALLATION

Location
The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc.
For safety reasons, minimum ventilation must be as
shown in Fig.
Appliance positioned under overhanging kitchen
wall units (see Fig. A).
Appliance positioned without overhanging kitchen
wall units (see Fig. B).
Attention: keep ventilation openings clear of
obstruction.
Two adjustable feet at the cabinet base allow
accurate levelling of the appliance.
44
Tic
Tic
Noise due to the adjustment of the unit's structure
Possible noise sources that are
easy to eliminate:
The appliance is not well levelled:
Simply adjust the levelling foot.
The appliance touches adjacent units:
Move the units away
Interior accessories are not fixed securely:
Remove the accessories and put them back
properly
Bottles and/or receptacles touch each other
inside the appliance:
Separate them.
ATTENTION!
It must be possible to disconnect the appliance from
the mains power supply; the plug must therefore be
easily accessible after installation.
A
B
NP004
D338 D338
5