Table of Contents
Advertisement
When you connect the appliance to the electri-
cal supply or in case of a power cut, the Time
function indicator flashes automatically.
To set the current time use " + " or " - " button.
After approximately 5 seconds, the flashing
stops and the display shows the time of day set.
For time change you must not set an automatic
function (Duration
time.
To use the appliance, push the control knob. The control knob comes out.
Switching the Oven On and Off
1. Turn the oven functions control knob to an oven function.
2. Turn the temperature control knob to a temperature.
The power indicator comes on while the oven is in operation.
The temperature light comes on while the oven temperature increases.
3. To switch off the oven, turn the oven functions control knob and the temperature
control knob to the Off position.
Cooling fan
When the appliance operates, the cooling fan switches on automatically. If you switch
off the appliance, the cooling fan continues to operate until the appliance cools down.
Cooking zones
With the control knobs for cooking zones you operate the hob that you installed with
the oven. For more information about the hob, refer to the hob user manual.
Heat settings
Cooking zone indicators (refer to "General overview ") show which zone you set.
Control knob
0
1-9
1. Turn the control knob to a necessary heat setting.
2. To complete the cooking process, turn the control knob to the "0" position.
Automatic heat-up function
This information is applicable only if you install the hob with Automatic heat up function!
The automatic heat-up function heats the cooking zone with full power for some time.
or End
) at the same
Keep warm setting
Off position
Heat settings
(1 = lowest heat setting; 9 = highest heat setting)
Function
7
Daily use
Advertisement
Table of Contents
